Compatible 3 Side Brushes Kit for iRobot Roomba 500 600 700 Vacuum Cleaner

Improve the cleaning efficiency of your robot vacuum cleaner with this brush set - code 0047128. Specifically designed for the models listed at the bottom of the page, these brushes are engineered to capture dust and debris along baseboards. Thanks to their precise angle, they channel dirt towards the central suction system, ensuring effective dirt removal.

Technical specifications
- Compatible iRobot spare part
- MPN code: 0047128
- Country of manufacture: China
- Material: plastic
- Equivalent or obsolete codes: 4757628
- Color: yellow and white
- Number of arms: 3
- Type of attachment: with cross screw
- Number of brushes included in the kit: 3

Installation instructions
- How to install the new brushes?
- Replacing them is a breeze: just use a screwdriver to remove the old brushes and secure the new component, and your robot will be as good as new.

What is this spare part for?
- What are the side rotating brushes for in a robot vacuum cleaner?
- These external brushes play a crucial role in the automated cleaning process. Since the main suction mouth of the robot is usually located in the center, the robot would not be able to reach the dirt accumulated near furniture without external help. The side brush rotates, channeling crumbs, hair, and dust into the suction path, allowing the device to clean the entire floor perfectly.

Professional tips and diagnostics
- How to tell if the brushes need replacing?
- If the robot vacuum cleaner is not cleaning well along the edges or corners, the problem is most likely caused by worn brushes.

- When should I replace the brushes?
- To check if your brushes need replacing, first inspect the aesthetic condition of the component; if you notice damaged or curled bristles or broken or missing arms, then proceed urgently with the replacement.

- How can I make them last longer?
- Frequently check and clean the side brushes, disassemble them when you check to ensure there are no hairs trapped underneath; this will also extend the life of the small motor that drives them.

- Every volta that you replace the brushes, perform thorough maintenance on your robot. In our shop, you can also find complete maintenance kits available with HEPA filters and suitable tools for perfect cleaning.

Symptoms, what problems can you solve by replacing the floor brushes
- Why is the robot vacuum cleaner not picking up dust along the wall edge?
- The problem is almost certainly due to worn brushes.

- Why are the side brushes not spinning?
- Sometimes hair or dirt accumulates under the side brushes, proceed to disassemble them for cleaning. If the problem persists, it may be caused by a faulty motor that drives them.

- In some models, you may hear two beeps or a mechanical blockage error 2. Check the side brushes, the motor that drives them, or the central roller module.

Compatibility (is it suitable for my product?)
This floor brush is tested for use on the following iRobot robot vacuum cleaner models. Carefully check the label on your appliance to avoid compatibility issues. If in doubt, contact us:

Roomba
500
510
520
530
531
532
534
535
540
550
555
560
562
563
564
565
570
580
581
590
600
610
612
620
630
631
650
676
680
700
750
760
770
775
776
780
782E