Carafe lid for Moulinex BlendUp Essential LM19H4 MS-653729 blender

Replacement bottle lid designed for the containers of the specified Moulinex blenders. This component, code MS-653729, allows the container to be properly closed during the mixing and processing of ingredients. This blender jar lid is useful for replacing a broken, deformed lid, or one that no longer locks correctly. Compatible with the models listed at the end of the description. Suitable for use with 700ml and 400ml bottles.

Features and technical data
- Original Moulinex spare part
- MPN (Manufacturer Part Number): MS-653729
- EAN code: 3221616144958
- Country of manufacture: Made in China
- Material: plastic
- Color: black
- Compatible series (check the models under compatibility): BlendUp, BlendUp Essential
- What's included: Lid with closing cap and seal
- Codes marked on the product: BL906M1, BL906M2

Measurements manually verified by PG Service
- Outer diameter 91.5mm
- Height 42mm

What is its function?
The jar lid on a blender serves to keep the top of the jar closed during blade rotation and food mixing. Its shape allows it to properly cover the container and contain the ingredients while they are blended. An intact and correctly positioned blender lid allows the jar to be used under the intended conditions, preventing openings or unwanted movements.

Symptoms, what problems can you solve by replacing the lid
- Does the lid not stay properly closed on the jar? A deformed jar lid or one with worn locking areas may no longer fit properly on the container.
- Do splashes escape from the top of the jar during blending? An incomplete closure, residue on the resting area, or a damaged cap can leave gaps through which ingredients are projected outside.
- Does the lid feel loose or move during operation? If the blender cap does not stay in place, it is advisable to check the integrity of the locking points and the correct fit with the container.
- Has the lid become difficult to insert or remove? Dry residue in the grooves, deformations, or misaligned assembly can make closing difficult.
- Are there cracks or breaks on the lid? It is advisable to replace the component, because a crack can spread due to the vibrations and stresses of use.
- Does the lid lift when ingredients are processed? A cap that is not correctly inserted or has deteriorated locking tabs can lose stability during the movement of ingredients in the jar.
- Does the lid appear intact but not fit evenly on the container? Check for residue on the rim of the jar and verify that the component has not undergone slight deformation.

How to preserve the component's lifespan
Regular cleaning of the blender cap prevents dry or sticky ingredients from remaining in the closing and locking areas. Use lukewarm water, mild detergent, and a soft sponge, paying special attention to the areas that are less easily accessible. Periodically check that the lid does not have any cracks and that all the points intended for closing are intact. If the component no longer stays stable on the jar, it is advisable to replace it rather than continue forcing the closure.

Assembly instructions
- Clean the resting area of the container, removing any ingredients that could hinder the closure.
- Align the jar lid with the container following the position intended by the respective locking seats.
- Complete the locking of the cap without forcing it, verifying that it enters its position correctly.
- Check that the lid is stable along the entire rim before using the blender.

Tips from PG Service professionals
- Before using the blender lid, we recommend checking that the rim of the jar and the closing surfaces are perfectly clean. Dry residue or encrustations can hinder the closure of the container and reduce the correct fit between the components. For quick cleaning, rinse the lid immediately after use with lukewarm water and mild detergent, paying attention to the grooves and locking areas. To extend its lifespan, avoid forcing the lid when it is not correctly aligned and avoid using pointed tools on the locking areas. The most common causes of breakage are jar impacts, out-of-position assembly, and repeated stresses on the locking parts.

Do you need anything else?
In addition to the replacement jar lid, we have many original Moulinex accessories and spare parts available in our store. If you cannot find what you need through independent browsing, you can contact us at any time, and we will respond very quickly, even on holidays and weekends. And if a product is not available, we will do everything we can to find it and order it exclusively for you. We offer much more than Moulinex blender spare parts!

Compatibility (is it suitable for my product?)
This jar cap is verified for use on the following Moulinex blender models. Always check the identification label of your appliance to be sure you are choosing the right part for your model. If you are not sure, ask our support team:

Compatible with Tefal

Blend Up
BL190A
BL190E
BL19G4
BL19H4
BL19JE
BL19NA
BL190AF0/870
BL190EG0/870
BL19G4K0/870
BL19H4B1/870
BL19H4B2/870
BL19H4F0/870
BL19H4G0/870
BL19H4X0/870
BL19JEF0/870
BL19NAK0/870

Blend Up Essential
BL1E04
BL1E0B
BL1EHB
BL1EJB
BL1E04F0/870
BL1E04J0/870
BL1E0BJ0/870
BL1EHBF0/870
BL1EHBK0/870
BL1EJBG0/870

Compatible with OBH Nordica

Blend Up
LH190E
LH19HA
LH190EN0/870
LH19HAN0/870

Compatible with Moulinex

Blend Up
LM190A
LM19H4
LM19JE
LM190AF0/870
LM19H410/870
LM19H4F0/870
LM19H4M0/870
LM19JEF0/870

Blend Up Essential
LM1E04
LM1EHB
LM1E04F0/870
LM1EHBF0/870